Catena Fodinae Altae Roboris, Catena Machinae Motoriae, Catena Levatoria, Catena G80,
Catena Fodinae Altae Roboris, Catena Machinae Motoriae, Catena Levatoria, Catena G80,
Categoria
Elevatio et ligatio, catena, catena nexus brevis, elevatio catenae nexus rotundi, catena Gradus 80, catena G80, funda catenae, catenae fundiariae, catena DIN 818-2 tolerantiae mediae pro fundis catenae Gradus 8, catena chalybis mixti.
Catena Levatoria, Catena G80, Catenae G80, Catena levatoria G80, Catena G8, Catena G80, catena mixturae g80, Catenae Levatoriae Venales, Elevatio 1 Tonnae, Catena levatoria et ligandi, catena nexus brevis, catena nexus rotundi elevatio, catena Gradus 80, catena chalybis mixturae, catena ad levandum, breviores catenarum levatoriarum, catenae levatoriae 10mm, catenae levatoriae certificatae, catenae levatoriae chalybis, catena levatoria en818-2, catenae levatoriae industriales, catenae levatoriae continentium, catenae et fundæ levatoriae, catenae levatoriae venales, fabricatores catenarum levatoriarum, gradus catenarum levatoriarum, magnitudines catenarum levatoriarum, nexus elevatorii, catenae levatoriae gravis officii, catena levatoria gravis officii, catena securitatis g80, catena ligandi g80.
Applicatio
Levatio et ligatio, onera sublata, onera ligata
Catenae SCIC Gradus 80 (G80) ad elevationem secundum normas EN 818-2 fabricantur, ex chalybe mixto niccoli chromii molybdeni manganesii secundum normas DIN 17115; soldadura et tractatio caloris bene designatae/monitoratae proprietates mechanicas catenarum, inter quas vis probationis, vis fractionis, elongatio et duritia, praestant.
Figura 1: Dimensiones nexus catenae Gradus 80
Tabula 1: Gradus 80 (G80) dimensiones catenae EN 818-2
| diameter | iactus | latitudo | pondus unitarium | |||
| nominalis | tolerantia | p (mm) | tolerantia | W1 interior | W2 exterior | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | CXX | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | CLXVII | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | CL | ± 4.5 | 65 | CLXXXV | 62 |
Tabula II: Proprietates mechanicae catenae Gradus 80 (G80), EN 818-2
| diameter | limes oneris laboris | vis probationis fabricationis | Vis frangendi minima |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | DCVIII |
| 23 | 16 | 415 | DCCLXV |
| 24 | 18 | 452 | DCCXXIII |
| 25 | 20 | 491 | DCCLXXXV |
| 26 | 21.2 | 531 | DCCCL |
| 28 | 25 | DCXVI | 985 |
| 30 | 28 | DCCVI | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | MDCCCX |
| 40 | 50 | 1260 | MMX |
| 45 | 63 | MDXC | 2540 |
| 48 | 72 | MDCCC | 2890 |
| 50 | 78.5 | MCMLXIII | 3140 |
| notae: elongatio ultima totalis ad vim fracturae est minimum 20%; | |||
| Mutationes Limitis Oneris Laboris pro temperatura | |
| Temperatura (°C) | % Voluntas Maxima (WLL) |
| -40 ad 200 | 100% |
| Ducenti ad trecentos | 90% |
| Trecenti ad quadringentos | 75% |
| plus quam quadringentos | inacceptabilis |
