Catena G80 G100 atra per immersionem calidam galvanizata ad elevandum
Catena G80 G100 atra per immersionem calidam galvanizata ad elevandum
Categoria
Elevatio et ligatio, catena, catena nexus brevis, elevatio catenae nexus rotundi, catena Gradus 100,Catena G100, funda catenaria, catenae fundariae, specificatio norma ASTM A973 / A973M-21 pro catena chalybis mixti Gradus 100
Applicatio
Levatio et ligatio, onera sublata, onera ligata
Catenae SCIC Gradus 100 (G100) ad elevationem secundum normas ASTM A973 / A973M-21 fabricantur, ex chalybe mixto niccoli chromii molybdeni manganesii secundum normas DIN 17115; soldadura et tractatio caloris bene designatae / monitoratae proprietates mechanicas catenarum, inter quas vis probationis, vis fractionis, elongatio et duritia, praestant.
Figura 1: Dimensiones nexus catenae Gradus 100
Tabula 1: Dimensiones catenae Gradus 100 (G100)
| diameter | iactus | latitudo | pondus unitarium | |||
| nominalis | tolerantia | p (mm) | tolerantia | W1 interior | W2 exterior | |
| 6 | ± 0.24 | 18 | ± 0.5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0.28 | 21 | ± 0.6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0.32 | 24 | ± 0.7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0.9 | 13 | 37 | 2.2 |
| 13 | ± 0.52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0.64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0.9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2.5 | 36.4 | 104 | 19.5 |
| 30 | ± 1.5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | CXX | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | CLXVII | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | CL | ± 4.5 | 65 | CLXXXV | 62 |
Tabula II: Proprietates mechanicae catenae Gradus 100 (G100)
| diameter | limes oneris laboris | vis probationis fabricationis | Vis frangendi minima |
| 6 | 1.4 | 36 | 57 |
| 7 | 1.9 | 48 | 77 |
| 8 | 2.5 | 63 | 101 |
| 10 | 4 | 98 | 157 |
| 13 | 6.7 | CLXVI | 265 |
| 16 | 10.3 | 251 | 402 |
| 18 | 12.5 | 318 | 509 |
| 19 | 14 | 354 | 567 |
| 20 | 16 | 393 | DCXXVIII |
| 22 | 19.4 | 475 | DCCLX |
| 23 | 20 | 519 | DCCCXXXI |
| 24 | 23 | 566 | 905 |
| 25 | 25 | DCXIV | 982 |
| 26 | 26.5 | DCCLXIV | 1060 |
| 28 | 30.5 | DCCLXIX | 1230 |
| 30 | 35.5 | DCCCLXXXIV | 1415 |
| 32 | 40.5 | 1006 | 1610 |
| 36 | 50 | 1272 | 2035 |
| 38 | 56.5 | 1420 | 2270 |
| 40 | 62.5 | MDCLXXI | 2515 |
| 45 | 81 | MCMLXXXVIII | 3180 |
| 48 | 92 | 2263 | 3620 |
| 50 | 98 | 2453 | 3925 |
| notae: elongatio ultima totalis ad vim fracturae est minimum 25%; | |||
| Mutationes Limitis Oneris Laboris pro temperatura | |
| Temperatura (°C) | % Voluntas Maxima (WLL) |
| -40 ad 200 | 100% |
| Ducenti ad trecentos | 90% |
| Trecenti ad quadringentos | 75% |
| plus quam quadringentos | inacceptabilis |
