Catena ferrea conglutinata DIN766
Catena ferrea conglutinata DIN766
Categoria
Catena elevatoria, catena nexus brevis,catena longa, catena rotundasublatio catenae, catenae elevationis,Catena gradus 50, catena gradus 70DIN 764-1, DIN 764-2, DIN 766;Catenae rotundae ferreae ad convectorem catenaeCatena transportatoria, catena elevatoris situlae,catena chalybis mixti
Applicatio
Elevator situlae, convector, scalpro Catenae pro elevatore situlae, convectore et scalpro SCIC catenas ferreas rotundas secundum normas DIN 764 (G30 et G50, versio 2010) et DIN 766 (versio 2015) producit, ad usus in elevatore situlae, convectore et scalpro. Catenae hic specificatae non adhibendae sunt ut instrumenta elevationis, fundis, vel alio opere sublationis supra caput.
Figura 1: Dimensiones catenae chalybeae rotundae secundum DIN 764 et DIN 766
Tabula 1: Dimensiones catenae chalybis rotundae secundum DIN 764 (G30 et G50) (mm)
| nominalis | diameter | iactus | latitudo | longitudo mensurae (11-vinculorum) | kg/m² | |||||
| dxt | d | tolerantia | t | tolerantia | interior | exterior | l | tolerantia | ||
| classisA | classis B | |||||||||
| 10 × 35 | 10 | ± 0.4 | 35 | +0.6/-0.2 | 14.0 | 36 | 385 | +2/-1 | +3/-1 | 2.1 |
| 13 × 45 | 13 | ± 0.5 | 45 | +0.8/-0.3 | 18.0 | 47 | 495 | +3/-1 | +4/-1 | 3.5 |
| 16 × 56 | 16 | ± 0.6 | 56 | +1.0/-0.3 | 22.0 | 58 | DCXVI | +3/-1 | +5/-2 | 5.3 |
| 18 × 63 | 18 | ± 0.9 | 63 | +1.1/-0.4 | 24.0 | 65 | DCXCIII | +4/-1 | +6/-2 | 6.7 |
| XX per LXX | 20 | ± 1.0 | 70 | +1.3/-0.4 | 27.0 | 72 | DCCCLXX | +4/-1 | +6/-2 | 8.3 |
| 23 × 80 | 23 | ± 1.2 | 80 | +1.4/-0.5 | 31.0 | 83 | DCCCLXXX | +5/-2 | +7/-2 | 11.0 |
| XXVI per XCI | 26 | ± 1.3 | 91 | +1.6/-0.5 | 35.0 | 94 | 1001 | +5/-2 | +8/-3 | 14.0 |
| XXX per CLV | 30 | ± 1.5 | 105 | +1.9/-0.6 | 39.0 | 108 | 1155 | +6/-2 | +9/-3 | 18.5 |
| 33 × 115 | 33 | ± 1.7 | 115 | +2.1/-0.7 | 43.0 | 119 | 1265 | +7/-2 | +10/-3 | 22.5 |
| 36 × 126 | 36 | ± 1.8 | 126 | +2.3/-0.8 | 47.0 | 130 | 1386 | +7/-2 | +11/-4 | 27.0 |
| 39 × 136 | 39 | ± 2.0 | 136 | +2.4/-0.8 | 51.0 | 140 | 1496 | +8/-3 | +12/-4 | 31.5 |
| 42 × 147 | 42 | ± 2.1 | 147 | +2.6/-0.9 | 55.0 | 151 | 1617 | +9/-3 | +13/-4 | 36.5 |
Tabula II: Dimensiones catenae chalybis rotundae secundum DIN 766 (mm)
| nominalis | diameter | iactus | latitudo | longitudo mensurae (11-vinculorum) | kg/m² | |||||
| dxt | d | tolerantia | t | tolerantia | interior | exterior | l | tolerantia | ||
| classis A | classis B | |||||||||
| 10 × 28 | 10 | ± 0.4 | 28 | +0.5/-0.3 | 14.0 | 36 | 308 | +2 / -1 | +2 / -1 | 2.3 |
| 13 × 36 | 13 | ± 0.5 | 36 | +0.6/-0.3 | 18.0 | 47 | 396 | +2 / -1 | +3 / -2 | 3.9 |
| 16 × 45 | 16 | ± 0.6 | 45 | +0.8/-0.4 | 22.5 | 58 | 496 | +3 / -1 | +4 / -2 | 5.9 |
| 18 × 50 | 18 | ± 0.9 | 50 | +0.9/-0.5 | 25.0 | 65 | 550 | +3 / -1 | +4 / -2 | 7.5 |
| XX per LVI | 20 | ± 1.0 | 56 | +1.0/-0.5 | 28.0 | 72 | DCXVI | +3 / -2 | +5 / -2 | 9.2 |
| 23 × 64 | 23 | ± 1.2 | 64 | +1.2/-0.6 | 32.0 | 83 | DCCIV | +4 / -2 | +6 / -3 | 12.0 |
| XXVI per LXXIII | 26 | ± 1.3 | 73 | +1.3/-0.7 | 34.0 | 94 | DCCCIII | +4 / -2 | +6 / -3 | 15.5 |
| XXX per LXXXIV | 30 | ± 1.5 | 84 | +1.5/-0.8 | 39.0 | 108 | 924 | +5 / -2 | +7 / -4 | 20.5 |
| 33 × 92 | 33 | ± 1.7 | 92 | +1.7/-0.8 | 43.0 | 119 | 1012 | +5 / -3 | +8 / -4 | 25.0 |
| 36 × 101 | 36 | ± 1.8 | 101 | +1.8/-0.9 | 47.0 | 130 | 1111 | +6 / -3 | +9 /-4 | 29.5 |
| 39 × 109 | 39 | ± 2.0 | 109 | +2.0/-1.0 | 50.5 | 140 | 1199 | +6 / -3 | +10 / -5 | 35.0 |
| 42 × 118 | 42 | ± 2.1 | 118 | +2.1/-1.1 | 54.5 | 151 | 1298 | +7 / -4 | +10 / -5 | 40.5 |
Tabula 3: Vis operativa et proprietates mechanicae catenae chalybis rotundae secundum DIN 764 (G30 et G50)
| magnitudo nominalis | vis laboris | fabricatio | vis frangens | deflexio flexionis | elongatio ultima totalis | |||||
| G30 | G50 | G30 | G50 | G30 | G50 | G30 | G50 | G30 | G50 | |
| 10 × 35 | 12.5 | 20 | 36 | 56 | 50 | 80 | 10 | 10 | 20 | 15 |
| 13 × 45 | 20 | 32 | 56 | 90 | 80 | 125 | 13 | 13 | ||
| 16 × 56 | 32 | 50 | 90 | 140 | 125 | ducenti | 16 | 16 | ||
| 18 × 63 | 40 | 63 | 110 | CLXXX | CLX | 250 | 18 | 18 | ||
| XX per LXX | 50 | 80 | 140 | 220 | ducenti | CCCXX | 20 | 20 | ||
| 23 × 80 | 63 | centum | CLXXX | 280 | 250 | quadringenti | 23 | 23 | ||
| XXVI per XCI | 80 | 125 | 220 | 360 | CCCXX | quingenti | 26 | 26 | ||
| XXX per CLV | 110 | CLXXX | CCCXX | quingenti | 450 | DCCX | 30 | 30 | ||
| 33 × 115 | 125 | ducenti | 360 | 560 | quingenti | DCCC | 33 | 33 | ||
| 36 × 126 | CLX | 250 | 450 | DCCX | DCXXX | mille | 36 | 36 | ||
| 39 × 136 | CLXXX | 280 | quingenti | DCCC | DCCX | 1100 | 39 | 39 | ||
| 42 × 147 | 220 | 360 | DCXXX | mille | 900 | 1400 | 42 | 42 | ||
Tabula 4: Vis operativa et proprietates mechanicae catenae chalybis rotundae secundum DIN 766
| magnitudo nominalis
| vis laboris | fabricatio | vis frangens | deflexio flexionis | elongatio ultima totalis | |
| verticalis | horizontalis | |||||
| 10 × 28 | 10 | 12.5 | 36 | 50 | 8 | 20 |
| 13 × 36 | 16 | 20 | 56 | 80 | 10 | |
| 16 × 45 | 25 | 32 | 90 | 125 | 13 | |
| 18 × 50 | 32 | 40 | 110 | CLX | 14 | |
| XX per LVI | 40 | 50 | 140 | ducenti | 16 | |
| 23 × 64 | 50 | 63 | CLXXX | 250 | 18 | |
| XXVI per LXXIII | 63 | 80 | 220 | CCCXX | 21 | |
| XXX per LXXXIV | 90 | 110 | CCCXX | 450 | 24 | |
| 33 × 92 | 110 | 130 | 380 | 530 | 26 | |
| 36 × 101 | 125 | CLX | 450 | DCXXX | 29 | |
| 39 × 109 | CL | 190 | 530 | DCCCL | 31 | |
| 42 × 118 | CLXXX | 220 | DCXXX | 900 | 34 | |
